Page 6 - Layout 1

Condenser Fan Motors

S

s
rR
Outdoor Condenser Fan Motors
Outdoor Condenser Fan Motors - O
Shaft Up Only
o
Ball Bearing
otT

60̊C
MARS outdoor condenser fan motors 60̊C
MARS up/down outdoor condenser MO
are designed for shaft up only

fan motors are designed for either 5 ⁄
5 ⁄
S
used in condenser fan and heat vertical shaft-up or shaft-down
pump units requiring vertical
applications. Shell and end shields 1 1 2 inch dia.
2 inch dia.
R
are enclosed for weather protection. shaft up positioning with
A
A weep hole is provided in each “belly band” or extended clamp
end shield to allow condensate to M
screw mounting.

drain. All of these motors are
suitable for air conditioning or heat Features:

pump applications.
• Rheem mounting holes
w/screws installed

Features:

• All angle
• For shaft up application

• Rheem mounting holes

• Reversible rotation

w/screws installed
• Water slinger on shaft

• Water slinger on shaft

• Thru-bolt or band mounting
• Full flatted six inch
shaft length

• Capacitor requirement noted on motor label
• Capacitor requirement noted
• Extra set of nuts & star washers on mounting studs
• Double full flatted shaft
on motor label

Specifications:
Specifications:

• Class “B” insulation

• Class “B” insulation • Totally enclosed
• Single phase, 60 hertz • 36 inch leads
• Single phase, 60/50 Hertz

• Thermal overload protected • UL Recognized
• Automatic thermal overload

protected

• Fan duty, continuous, air over

Reversible Rotation – Single Speed

MARS DIMENSIONS • 36 inch leads
CAP

HP VOLTS AMPS
• Lead end endshield RPM
NO.
REQ. A B C
open construction

1075 RPM

208-230 0.90 10732 1/6 1075 5/370 6.50 4.13 1/2
• UL Recognized

208-230 1.8 10733 1/4 1075 5/370 6.50 4.25 1/2
1075 RPM – Shaft-Up – Single Speed – Sleeve Bearings

208-230 2.4 10734 1/3 1075 7.5/370 6.50 5.10 1/2

208-230 3.5 10735 1/2 1075 10/370 6.50 5.70 1/2
MARS CAP DIMENSIONS

NO.
HP
VOLTS
AMPS ROTATION REQ.
A
B C

208-230 5.2
10736 3/4
1075 10/370
6.50 5.11
1/2
208-230 10327 1/6 0.9 REV 5/370 6.0 4.15 1/2
HP
MARS CAP
DIMENSIONS
VOLTS
AMPS
RPM

208-230 NO.
REQ.ABC 10328 1/4
1.8 REV 5/370 6.0 4.15 1/2
208-230 2.4 REV 7.5/370 6.0 5.11 1/2 825 RPM
10329 1/3
10203
208-230 1.0 825 5/370 5.50 4.10 1/2 1/6 208-230 3.5 REV 10/370 6.0 5.70 1/2 10330 1/2
208-230 2.2 825 5/370 5.50 4.40 1/2 1/4 10204
208-230 1.9 825 7.5/370 5.50 5.10 1/2 1/3 208-230
5.2 REV 10/370
6.0
6.09 1/2
10331 3/4
10205

208-230 2.8 825 12.5/370 6.50 5.70 1/2
1/2
10747

60̊C

MARS Three Wire Condenser Fan Motors
5⁄

1 Ball Bearing
2 inch dia.

MARS 3 Wire condenser fan motors replicate OEM wiring for
condenser fan motors speeding installation and saving time.

Condenser fan motors are designed for either shaft-up or shaft-down

applications. End shields are enclosed for weather protection.

A weep hole is provided in each end shield to allow condensate to
drain. All of these motors are suitable for air conditioning or heat
pump applications.

Features: Specifications:

• All angle, ball bearing
• Class “B” insulation

Reversible Rotation – Single Speed – 3 Wire

• Rheem mounting holes
• Single phase, 60 Hertz

• Thermal overload protected
w/screws installed
DIMENSIONS MARS CAP
• Fan duty, continuous, air over • Water slinger on shaft
NO. REQ. ABC
HP VOLTS AMPS
ENCL.
BRG.

• Totally enclosed
• Thru bolt or band mounting

1075 RPM

• 36 inch leads
• Capacitor requirement noted
5/370 TEAO Sleeve 6.50 4.23 1/2 23728 1/4 208-230 1.8
• UL Recognized
on motor label

• Double full flatted shaft
7.5/370 TEAO
Sleeve
6.50 5.23 1/2
23729 1/3 208-230 2.4

Toll Free (800) 445-4155 • Fax (631) 348-7160 M–6

www.marsdelivers.com
®

marsdelivers.com